| Description_DEF |
Radiator Coolant Hose Kit |
| Description_EXT |
Silicone Coolant Hose Kit, fits Ford 6.4L Powerstroke 2008-2010 |
| Description_DES |
Ford 6.4L Powerstroke Silicone Coolant Hose Kit, 2008-2010 |
| Description_MKT |
Mishimoto has developed a silicone coolant hose kIt'specifically for the 2008-2010 6.4L Powerstroke. Mishimoto silicone hose kits are constructed from a combination of high-grade silicone and five layers of heat-resistant embedded fibers to provide the ultimate upgrade in reliability, durability, and performance. The engineers at Mishimoto designed four 6061 aluminum CNC-machined couplers which mate the silicone hoses to either the factory or Mishimoto radiator and include spring clips for a simple install. All of the CNC-machined couplers also feature a double o-ring design to prevent air pockets from entering the cooling system. To add even more reliability, the CNC-machined couplers are pre-attached with worm-gear clamps for an easy install and accurate, consistent holding power. This silicone coolant hose kit is the perfect addition to the Mishimoto 6.4L Powerstroke Performance Aluminum Radiator. The Mishimoto 6.4L Powerstroke Silicone Coolant Hose Kit includes our signature Mishimoto Lifetime Warranty. |
| Description_FAB |
Direct fit for 6.4L Powerstroke |
| Description_FAB |
Four 6061 aluminum CNC-machined couplers mate hoses to factory or Mishimoto radiator |
| Description_FAB |
Double O-ring design prevents air pockets from entering cooling system |
| Description_FAB |
Couplers come preattached to hoses with worm-gear clamps and spring clips for easy install |
| Description_FAB |
Five layers of heat-resistant fibers and silicone |
| Description_FAB |
Offered in black, blue, or red |
| Description_FAB |
Mishimoto Lifetime Warranty |
| Description_INV |
Mishimoto MMHOSE-F2D-08RD |
| Description_SHO |
Coolant Hose Kit |
| TechSpec Purchase Includes |
(3) Silicone Hoses--(4) CNC Aluminum Couplers (pre-attached)--(4) Stainless Steel Spring Clips (pre-attached)--(1) Aluminum Tube Joiner (pre-attached)--(5) 50-70mm Worm Gear Clamps (pre-attached)--(1) 50-70mm Worm Gear Clamp--(8) Rubber O-Rings (pre-installed)--Mishimoto Lifetime Warranty |
| SellingPoint03 |
Double O-ring design prevents air pockets from entering cooling system |
| SellingPoint04 |
Couplers come preattached to hoses with worm-gear clamps and spring clips for easy install |
| TechSpec Material |
Silicone |
| SellingPoint13 |
N/A |
| SellingPoint05 |
Five layers of heat-resistant fibers and silicone |
| TechSpec Chassis Codes |
N/A |
| TechSpec Coupler Style |
N/A |
| TechSpec Engine Codes |
N/A |
| TechSpec Inner Diameter (in) |
N/A |
| TechSpec Length (Inches) |
N/A |
| TechSpec Outer Diameter (in) |
N/A |
| Install Difficulty |
4 |
| OptionLabel |
Red |
| SellingPoint01 |
Direct fit for 6.4L Powerstroke |
| SellingPoint02 |
Four 6061 aluminum CNC-machined couplers mate hoses to factory or Mishimoto radiator |
| SellingPoint08 |
N/A |
| SellingPoint09 |
N/A |
| SellingPoint11 |
N/A |
| SellingPoint12 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| TechSpec Applications |
N/A |
| TechSpec Interior Material |
N/A |
| TechSpec Maximum Temperature Rating |
330 |
| TechSpec Note |
It is the installer's responsibility to check all clamps and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, click here http://www.mishimoto.com/contact.html to contact us.----CNC-machined from T-6061 aluminum.--Mates radiator hoses to either the factory or Mishimoto radiator.--Features pre-installed and lubricated rubber O-rings. |
| SellingPoint06 |
Offered in black, blue, or red |
| SellingPoint07 |
Mishimoto Lifetime Warranty |
| SellingPoint10 |
N/A |
| Length |
5.5000 |
| Width |
16.0000 |
| Height |
32.0000 |
| Weight |
13.0000 |
