| Description_ASM |
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information. |
| Description_DES |
Open Wheel Modified Traction Control NIT 254/260 Solid Flact Cam for SBC |
| Description_DEF |
Engine Camshaft |
| Description_INV |
OW Md Trc Ctrl NIT 254/260 S-Flt Cam SBC |
| Description_EXT |
1/3-1/2 tracks w/ tight corners or heavy surface. 327-358c.i., 11:1 compression, 2/4 BBL gas or alcohol. Nitrided. |
| Description_SHO |
OWMTC 254/260SFTSBC |
| Description_KEY |
265, 283, 307, 302, 305, 327, 350, 383, 400, 427, L46, L48, L65, LM1, LT-1, L82, L81, LS9, L83, L98, L05, LG3, LG4, LT1, LT4, Camaro, Corvette, Chevelle, Stingray, Silverado, C10, Firebird, Chevrolet, Chevy, Small Block Chevy, Caprice, Malibu, Impala, Nova, 355, GEN1, Monte Carlo, S10 |
| Description_SHP |
None |
| Camshaft Series |
Open Wheel Modified Traction Control (1.6 Rocker Ratio) |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles? |
Yes, but must be a race/competition only vehicle. |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Lifters Included |
No |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| Lobe Separation |
107 |
| Engine Family |
Chevrolet 262-400 c.i. 8 Cylinder (1958-1998) |
| Exhaust Valve Lift |
0.597 |
| Intake Duration at .050 Inch Lift |
254 |
| Assembly Lubricant Included |
Yes |
| Lifter Type |
Solid Flat Tappet |
| Usage |
Strip |
| C.A.R.B. Exempt for On-Road Vehicles? |
No |
| Intake Valve Lift |
0.59 |
| Camshaft Material |
Nitrided Cast Iron |
| Advertised Intake Duration |
280 |
| Grind Number |
280MHQ S7 |
| Title |
Open Wheel Modified Traction Control NIT 254/260 Solid Flact Cam for SBC |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| Exhaust Duration at .050 inch Lift |
260 |
| Basic Operating RPM Range |
3,100-7,100 |
| Amazon ASIN |
B002EE6EGE |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| Valve Springs Required |
Yes |
| Cam Type |
Solid Flat Tappet |
| Camshaft Gear Attachment |
3-Bolt |
| C.A.R.B. Exemption Reason |
N/A |
| Advertised Exhaust Duration |
289 |
| C.A.R.B. E.O. Number |
N/A |
| Length |
3.0000 |
| Width |
3.0000 |
| Height |
23.0000 |
| Weight |
9.0000 |
