{"title":"Infotainment Display","description":null,"products":[{"product_id":"spod-870089-touchscreen-bantamx-vehicle-kit-toyota-2022-on-tundra","title":"sPOD 870089 Touchscreen BantamX Vehicle Kit - Toyota 2022-On Tundra","description":"\u003cp\u003e\r\nsPOD BantamX Touchscreen vehicle-specific kit for Toyota Tundra (22-on) has been designed specifically to integrate the sPOD Touchscreen panel into your cabin seamlessly while providing a safe place to access all your controls.Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.The BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone.Fully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)100amp fuseNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder-coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road modes of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shutdownSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsEXTERNAL CONTROLLER OPTIONS: (not included with the system and can only be used in conjunction with an sPOD controller)Third-party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTOUCHSCREEN CONTROL PANELPlease note: The touchscreen display will become inoperable if ambient temperatures drop below 20 degrees F. Let the temperature of the cab of the vehicle warm up before the operation.Touchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch-off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003c\/p\u003e\u003ch3\u003e Specifications: \u003c\/h3\u003e\r\n\r\n\u003ctable border=\"0\" class=\"descr-table\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_MKT\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003esPOD BantamX Touchscreen vehicle-specific kit for Toyota Tundra (22-on) has been designed specifically to integrate the sPOD Touchscreen panel into your cabin seamlessly while providing a safe place to access all your controls.Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.The BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone.Fully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)100amp fuseNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder-coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road modes of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shutdownSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsEXTERNAL CONTROLLER OPTIONS: (not included with the system and can only be used in conjunction with an sPOD controller)Third-party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTOUCHSCREEN CONTROL PANELPlease note: The touchscreen display will become inoperable if ambient temperatures drop below 20 degrees F. Let the temperature of the cab of the vehicle warm up before the operation.Touchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch-off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_SHO\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eTouchscreen BantamX Vehicle Kit - Toyota 2022-On Tundra sPOD\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003efinish\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ePowdercoat\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ematerial\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eBillet Aluminum\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ecolor\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eBlack\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eseries\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eLength\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWidth\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eHeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e13.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e5.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":47826443600085,"sku":"ds_GNJV_870089","price":2127.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/8999\/9829\/files\/Touchscreen-Bantamx-Vehicle-Kit---Toyota-2022-On-Tundra.jpg?v=1717590576"},{"product_id":"spod-870035-bantamx-touchscreen-for-jk-2007-2018","title":"sPOD 870035 BantamX Touchscreen for JK 2007-2018","description":"\u003cp\u003e\r\nThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.Features:Fully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)50amp auto-resetting circuit breakerNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFeatures Available Through sPOD Mobile App (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shut downSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):Third party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTouchscreen Control PanelTouchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.Notes:The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.Additional Touchscreen Mounting Options (sold separately):RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003c\/p\u003e\u003ch3\u003e Specifications: \u003c\/h3\u003e\r\n\r\n\u003ctable border=\"0\" class=\"descr-table\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_MKT\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.Features:Fully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)50amp auto-resetting circuit breakerNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFeatures Available Through sPOD Mobile App (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shut downSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):Third party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTouchscreen Control PanelTouchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.Notes:The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.Additional Touchscreen Mounting Options (sold separately):RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_SHO\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eBantamX Touchscreen for JK 2007-2018\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003efinish\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ePowdercoat\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eseries\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eLength\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWidth\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eHeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e13.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e5.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":47826646008021,"sku":"ds_GNJV_870035","price":1801.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/8999\/9829\/files\/07-18-Jeep-Wrangler-Jk-Bantamx-Touchscreen.jpg?v=1717591493"},{"product_id":"spod-860800-add-on-touchscreen-for-8-circuit-systems","title":"sPOD 860800 Add-On Touchscreen for 8 Circuit Systems","description":"\u003cp\u003e\r\nAdd-On Touchscreen For 8 Circuit Systems. Time to add a Touchscreen to your 8 Circuit systems  This can be added to your existing 8 circuit systems or used as a second Touchscreen for your existing 8 circuit system. Is not compatible with Gen I or Gen II 6 circuit system.The industry leader in power and control solutions. sPOD systems utilize automotive grade approved high-power, high-temp, ultra-reliable components with a maximum 100 amp capacity!The sPOD SourceSE is a Solid-State fully programmable digital CAN-Bus controlled system utilizing state-of-the-art technologies. OEM vehicle specific simple installation hardware, engineered and 100 percent manufactured in the United States since 2006.The touchscreen controller is small but packs a big punch! (3-3\/4w X 2-7\/8h X 5\/8 thick) The control module is a 3.5-inch LED-backlit TFT LCD screen with a resolution of 320 x 240, 16.7m colors and a viewing angle of 180 degrees housed in a billet aluminum case.Touchcreen comes with it's own with it's own universal mounting bracket. The connection between the SourceSE and the touchscreen uses a standard Ethernet cable 10 feet long.Note: The touchscreen is not weather resistant and should not be exposed to the elements. Water or any liquids will damage the touchscreen and void the warranty.Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Each switch is programmable for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationTouchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)SourceSE board temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with it's own mounting bracket.Options:RAM-201U Double Socket Arm for 1 inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1 inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1 inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)Notes:The Touchscreen will go into Deep Sleep after 6 hours of inactivity (ie: no usage of the HD or not running the engine). Once in deep sleep,the HD will turn off any accessories that were left on (including refrigerators!).The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contribute to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on location of the Touchscreen, the surroundings, phone type, phone cover and many other variables.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003c\/p\u003e\u003ch3\u003e Specifications: \u003c\/h3\u003e\r\n\r\n\u003ctable border=\"0\" class=\"descr-table\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_MKT\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eAdd-On Touchscreen For 8 Circuit Systems. Time to add a Touchscreen to your 8 Circuit systems? This can be added to your existing 8 circuit systems or used as a second Touchscreen for your existing 8 circuit system. Is not compatible with Gen I or Gen II 6 circuit system.The industry leader in power and control solutions. sPOD systems utilize automotive grade approved high-power, high-temp, ultra-reliable components with a maximum 100 amp capacity!The sPOD SourceSE is a Solid-State fully programmable digital CAN-Bus controlled system utilizing state-of-the-art technologies. OEM vehicle specific simple installation hardware, engineered and 100 percent manufactured in the United States since 2006.The touchscreen controller is small but packs a big punch! (3-3\/4w X 2-7\/8h X 5\/8 thick) The control module is a 3.5-inch LED-backlit TFT LCD screen with a resolution of 320 x 240, 16.7m colors and a viewing angle of 180 degrees housed in a billet aluminum case.Touchcreen comes with it's own with it's own universal mounting bracket. The connection between the SourceSE and the touchscreen uses a standard Ethernet cable 10 feet long.Note: The touchscreen is not weather resistant and should not be exposed to the elements. Water or any liquids will damage the touchscreen and void the warranty.Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Each switch is programmable for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationTouchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)SourceSE board temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with it's own mounting bracket.Options:RAM-201U Double Socket Arm for 1 inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1 inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1 inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)Notes:The Touchscreen will go into Deep Sleep after 6 hours of inactivity (ie: no usage of the HD or not running the engine). Once in deep sleep,the HD will turn off any accessories that were left on (including refrigerators!).The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contribute to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on location of the Touchscreen, the surroundings, phone type, phone cover and many other variables.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_SHO\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eAdd-On Touchscreen for 8 Circuit Systems\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eseries\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eLength\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e6.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWidth\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e8.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eHeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e13.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e5.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":47828836712661,"sku":"ds_GNJV_860800","price":523.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/8999\/9829\/files\/8-Circuit-Systems-Add-On-Touchscreen.png?v=1717601822"},{"product_id":"spod-bxtsbuni36-bantamx-touchscreen-for-uni-with-36-inch-battery-cables","title":"sPOD BXTSBUNI36 BantamX Touchscreen for Uni with 36 Inch battery cables","description":"\u003cp\u003e\r\nThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.Features:BantamX Touchscreen for Uni with 36 Inch battery cablesFully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)50amp auto-resetting circuit breakerNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFeatures Available Through sPOD Mobile App (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shut downSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):Third party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTouchscreen Control PanelTouchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.Notes:The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.Additional Touchscreen Mounting Options (sold separately):RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003c\/p\u003e\u003ch3\u003e Specifications: \u003c\/h3\u003e\r\n\r\n\u003ctable border=\"0\" class=\"descr-table\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_MKT\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.Features:BantamX Touchscreen for Uni with 36 Inch battery cablesFully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)50amp auto-resetting circuit breakerNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFeatures Available Through sPOD Mobile App (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shut downSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):Third party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTouchscreen Control PanelTouchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.Notes:The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.Additional Touchscreen Mounting Options (sold separately):RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_SHO\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eBantamX Touchscreen for Uni with 36 Inch battery cables\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003efinish\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ePowdercoat\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eseries\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eLength\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWidth\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eHeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e13.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e5.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":47830264840405,"sku":"ds_GNJV_BXTSBUNI36","price":1302.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/8999\/9829\/files\/Bantamx-Touchscreen-For-Uni-_36-In-Battery-Cables.jpg?v=1717609232"},{"product_id":"spod-bxtsbuni84-bantamx-touchscreen-for-uni-with-84-inch-battery-cables","title":"sPOD BXTSBUNI84 BantamX Touchscreen for Uni with 84 Inch battery cables","description":"\u003cp\u003e\r\nThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.Features:BantamX Touchscreen for Uni with 84 Inch battery cablesFully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)50amp auto-resetting circuit breakerNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFeatures Available Through sPOD Mobile App (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shut downSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):Third party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTouchscreen Control PanelTouchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.Notes:The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.Additional Touchscreen Mounting Options (sold separately):RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003c\/p\u003e\u003ch3\u003e Specifications: \u003c\/h3\u003e\r\n\r\n\u003ctable border=\"0\" class=\"descr-table\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_SHO\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eBantamX Touchscreen for Uni with 84 Inch battery cables\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_MKT\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.Features:BantamX Touchscreen for Uni with 84 Inch battery cablesFully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)50amp auto-resetting circuit breakerNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFeatures Available Through sPOD Mobile App (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shut downSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):Third party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTouchscreen Control PanelTouchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.Notes:The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.Additional Touchscreen Mounting Options (sold separately):RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003efinish\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ePowdercoat\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eseries\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eLength\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWidth\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eHeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e13.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e5.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":47830265659605,"sku":"ds_GNJV_BXTSBUNI84","price":1323.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/8999\/9829\/files\/Bantamx-Touchscreen-For-Uni-_84-In-Battery-Cables.jpg?v=1717609252"},{"product_id":"spod-860805-add-on-touchscreen-w-30-ft-cable","title":"sPOD 860805 Add-On Touchscreen w\/ 30 Ft Cable","description":"\u003cp\u003e\r\nAdd-On Touchscreen For 8 Circuit Systems (BantamX)Time to add a Touchscreen to your 8 Circuit systems  This can be added to your existing 8 circuit systems or used as a second Touchscreen for your existing 8 circuit system. The Touchscreen is not compatible with the 6 circuit systems. Available with 30 foot control cable.The industry leader in power and control solutions. sPOD systems utilize automotive grade approved high-power, high-temp, ultra-reliable components with a maximum 100 amp capacity! OEM vehicle specific simple installation hardware, engineered and 100 percent manufactured in the United States since 2006.The touchscreen controller is small but packs a big punch! (3-3\/4w X 2-7\/8h X 5\/8 thick) The control module is a 3.5-inch LED-backlit TFT LCD screen with a resolution of 320 x 240, 16.7m colors, and a viewing angle of 180 degrees housed in a billet aluminum case. The touchscreen comes with its own universal mounting bracket. The connection between the 8 Circuit System and the touchscreen uses a standard Ethernet cable that is 10 feet long.The sPOD Touchscreen is a resistive touchscreen - meaning unlike most smartphones, it works based on pressure. A stronger touch is necessary for it to respond. This type of touchscreen is very common in industrial electronics, like what you may find for many vehicle touchscreens. For more information, please refer to the Get To Know Your Touchscreen booklet.NOTE: The touchscreen is NOT weather resistant and should NOT be exposed to the elements. Water or any liquids will damage the touchscreen and void the warranty.Please note:The touchscreen display will become inoperable if ambient temperatures drop below 45 degrees F.Let the temperature of the cab of the vehicle warm up before operation.Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Each switch is programmable for:DimmingStrobeFlashMomentarySwitch LinkingOn-Road and Off-Road mode of operationTouchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)SourceSE\/Bantam\/BantamX board temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One-touch off functionOne second hold on-off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Options:RAM-201U Double Socket Arm for 1 inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1 inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1 inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)Notes:The Touchscreen will go into Deep Sleep after 6 hours of inactivity (ie: no usage of the HD or not running the engine). Once in deep sleep, the HD will turn off any accessories that were left on (including refrigerators!). Please contact us if you would like this feature disabled: sales@4x4s-pod.com.The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contribute to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on location of the Touchscreen, the surroundings, phone type, phone cover and many other variables.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003c\/p\u003e\u003ch3\u003e Specifications: \u003c\/h3\u003e\r\n\r\n\u003ctable border=\"0\" class=\"descr-table\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_MKT\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eAdd-On Touchscreen For 8 Circuit Systems (BantamX)Time to add a Touchscreen to your 8 Circuit systems? This can be added to your existing 8 circuit systems or used as a second Touchscreen for your existing 8 circuit system. The Touchscreen is not compatible with the 6 circuit systems. Available with 30 foot control cable.The industry leader in power and control solutions. sPOD systems utilize automotive grade approved high-power, high-temp, ultra-reliable components with a maximum 100 amp capacity! OEM vehicle specific simple installation hardware, engineered and 100 percent manufactured in the United States since 2006.The touchscreen controller is small but packs a big punch! (3-3\/4w X 2-7\/8h X 5\/8 thick) The control module is a 3.5-inch LED-backlit TFT LCD screen with a resolution of 320 x 240, 16.7m colors, and a viewing angle of 180 degrees housed in a billet aluminum case. The touchscreen comes with its own universal mounting bracket. The connection between the 8 Circuit System and the touchscreen uses a standard Ethernet cable that is 10 feet long.The sPOD Touchscreen is a resistive touchscreen - meaning unlike most smartphones, it works based on pressure. A stronger touch is necessary for it to respond. This type of touchscreen is very common in industrial electronics, like what you may find for many vehicle touchscreens. For more information, please refer to the Get To Know Your Touchscreen booklet.NOTE: The touchscreen is NOT weather resistant and should NOT be exposed to the elements. Water or any liquids will damage the touchscreen and void the warranty.Please note:The touchscreen display will become inoperable if ambient temperatures drop below 45 degrees F.Let the temperature of the cab of the vehicle warm up before operation.Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Each switch is programmable for:DimmingStrobeFlashMomentarySwitch LinkingOn-Road and Off-Road mode of operationTouchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)SourceSE\/Bantam\/BantamX board temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One-touch off functionOne second hold on-off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Options:RAM-201U Double Socket Arm for 1 inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1 inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1 inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)Notes:The Touchscreen will go into Deep Sleep after 6 hours of inactivity (ie: no usage of the HD or not running the engine). Once in deep sleep, the HD will turn off any accessories that were left on (including refrigerators!). Please contact us if you would like this feature disabled: sales@4x4s-pod.com.The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contribute to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on location of the Touchscreen, the surroundings, phone type, phone cover and many other variables.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_SHO\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eAdd-On Touchscreen w\/ 30 Ft Cable sPOD\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ecolor\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eBlack\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003efinish\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ePowdercoat\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ematerial\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eBillet Aluminum\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eseries\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eLength\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e1.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWidth\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e1.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eHeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e1.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e1.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":47998996283605,"sku":"ds_GNJV_860805","price":768.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/8999\/9829\/files\/Add-On-Touchscreen-W-30-Ft-Cable.jpg?v=1718471116"},{"product_id":"spod-870040-bantamx-touchscreen-for-jl-jt","title":"sPOD 870040 BantamX Touchscreen for JL\/JT","description":"\u003cp\u003e\r\nThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.Note: JL\/JT with a diesel engine requires a special bracket.Features:Fully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)50amp auto-resetting circuit breakerNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFeatures Available Through sPOD Mobile App (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shut downSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):Third party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTouchscreen Control PanelTouchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.Notes:The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.Additional Touchscreen Mounting Options (sold separately):RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003c\/p\u003e\u003ch3\u003e Specifications: \u003c\/h3\u003e\r\n\r\n\u003ctable border=\"0\" class=\"descr-table\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_MKT\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eThe BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.Note: JL\/JT with a diesel engine requires a special bracket.Features:Fully programmable, digital controlled system8 circuits rated at 30 amps at 12.5 VDC per circuit16-position terminal block (easily attach accessories)2 controller ports (RJ45) for Ethernet cablesIntegrated low voltage cutoff (LVCO) battery protection w\/ optional overrideOne ATM mini-style fuse for LVCO protection and resetFailsafe self-healing fault protection system (from 1.5 to 30amps)Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)50amp auto-resetting circuit breakerNylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacketOperates on 12VDC or 24VDC8-position input terminal block for controlling outputsBuilt-in Bluetooth capabilities for remote controlProtection against: overheating, over-current, shorts, reverse polarity and field collapseIgnition control and safety lock-out for switches 1 and 2 (optional)Up to 4 BantamX units can be daisy chained and controlled by one TouchscreenOn-demand wireless software updates\/upgradesHardware:Powder coated steel base w\/ built in hardwareSilicone gasket for weatherproofingSimple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placementUniversal and vehicle specific mounting optionsRobust insulated base and coverFeatures Available Through sPOD Mobile App (free):Each switch can be programmed for:DimmingStrobeFlashMomentarySwitch LinkingOn Road and Off Road mode of operationThe following features are only available through the purchase of our Pro-Series mobile App:Circuit timersSwitch lockoutInitial startup current for each circuit is raised to 65amps for 5 secondsProgram any circuit to be always on while still maintaining fault protectionOption to disable deep sleep modeSelectable auto restart after circuit shuts down from over current\/shortProgrammable Current Limiting (in 2amp increments up to 30amps)Selectable auto restart for current limiting shut downSelectable Latch or Momentary actions for inputsProgrammable ignition control for all 8 circuitsVariable strobe function to create custom flash\/strobe patternsExternal Controller Options (not included with system and can only be used in conjunction with an sPOD controller):Third party switchesComputersArduinoRaspberry PiAlpine Audio systems KAC-001 head unit controllerSensors, thermostats, pressure switches, fan controllers and moreTouchscreen Control PanelTouchscreen Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.Increase in switch lifecycle over traditional electromechanical switches.Touchscreen Control Module Features:Voltage feedback (vehicles battery\/alternator voltage)Amperage meter for each switch gives you the status of how much current each accessory is drawingBoard temperature feedback (shown on screen)Customization: legends (3 lines of text)Automatic backlighting off after 30 minutes of being inactivityAutomatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)One touch off functionOne second hold on off button shuts all circuits downAutomatic system shut down when the touchscreen is unpluggedBacklight dimmingMultiple Source select (One touchscreen can control up to 32 circuits)Come with its own mounting bracket.Bluetooth for use in programming the touchscreen.Notes:The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range.Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations.Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.Additional Touchscreen Mounting Options (sold separately):RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eDescription_SHO\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eBantamX Touchscreen for JL\/JT\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003efinish\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003ePowdercoat\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eseries\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eLength\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWidth\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e10.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eHeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e13.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr style=\"height: 19px;\"\u003e\r\n\u003ctd style=\"height: 19px;\"\u003eWeight\u003c\/td\u003e\r\n\u003ctd style=\"height: 19px;\"\u003e5.0000\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":48002495840469,"sku":"ds_GNJV_870040","price":1180.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/8999\/9829\/files\/Bantamx-Touchscreen-For-JlJt.jpg?v=1718487035"}],"url":"https:\/\/shdp.ca\/collections\/infotainment-display.oembed","provider":"SHDP Truck \u0026 Auto","version":"1.0","type":"link"}